Samsung M60 - HD DVD

183
Q
When no headset is found or cannot be
connected
A1
If the headset is already connected to another
device,youwillnotbeabletondtheheadsetand
cannot connect to the headset even if the headset is
found.Disconnecttheconnectiontotheotherdevice
andthenstartthesearchagain.
A2 Iftheheadsetisconnectedtoapoweradapter,you
cannotmakeaBluetoothconnection.
Disconnectthepoweradapterandthenretry.
A3 Ingeneral,aBluetoothheadsethas2operating
modes,On/OffmodeandPairingmode.
To connect the headset to another Bluetooth device
suchasaPCorcellphone,theheadsetmustbein
Pairingmode.
Switch the headset to Pairing mode and then retry
thesearchoperation.
Ingeneral,theheadsetinPairingmodeautomatically
returnstoOn/Offmodeafteracertainperiodoftime.
Q
There is no sound or sound is intermittently
interrupted after connecting a headset
A1
If your headset is a mono headset,checkifamono
headsetconnectionhasbeenmade.Inthiscase,to
resolvetheproblem,completetheproceduresbelow.
 Double-clicktheBluetoothiconinthenotication
areaoftheTaskbar,selecttheAudiotaband
checktheconnectivityoftheBluetoothHands
Free Audio Device that corresponds to the
headsetintheConnectedDeviceList.Ifitisnot
con-nected,right-clickoverthedeviceandselect
Connect.
 Right-clicktheSpeakericoninthenotication
areaoftheTaskbar,select Play Device >
Bluetooth Audio > Load Defaults and then click
the OKbutton.
 AfterchangingtheBluetoothorsoundsettings,
youhavetoexitandre-launchtheaudioand
videoplayerprogramstoapplythechanges.
Note
The Bluetooth Mono Headphone and Microphone
functionsareactivated.