Samsung M60 - Page 69

68
Selecting Digital Output in the DVD Player Program
SincethesoundsettingissettoDigitalOutputbydefault,youdonotadditionallyneedtocongureitfordigitaloutput.
Youcanconrmyoursettingsasfollows.
1
 IftheCyberLinkPowerDVDprogramisnotinstalled,installtheprogramusingthesystemsoftwaremedia(or
additionalCDdependingonthecomputermodel).
2
 LaunchCyberLinkPowerDVDandclickCongure.
3
 ChangetheSpeakerEnvironmentvaluetoUseS/PDIFintheAudiotab.
4
 InsertandplayaDVDtitle.YoucanlistentoS/PDIFsound.
Note
ForsomeDVDtitles,youcanlistentomorerealisticsoundifyouadditionallyselectS/PDIFfromtheSetupmenuoftheDVD
title.