Samsung MCM-A300N - Specifications on Electricity Meter

Control Systems
130
IVIV
Power distribution system
1. Electricity meter interface module
5) Specifications on electricity meter
tCurrent flow on output : Current-sinking
tPulse rate :
1PXFSNFUFS_8IQVMTFOPEFDJNBMQVMTFSBUFBMMPXFE
(BTNFUFS_N
3
/pulse
8BUFSNFUFS_MJUFSQVMTFOPEFDJNBMQVMTFSBUFBMMPXFE
tPulse width :_NTXJUIUPMFSBODFOPEFDJNBMQVMTFSBUFBMMPXFE
tTime interval between pulses : min. 3ms
tAllowable current sinking : min. 15mA
tWithstanding voltage : min. 15V DC
tInterface circuitry : Electronic isolation circuitry recommended, no voltage output
󱀣 MIM-B16N
;
Note
 Interface circuitry of an electricity meter has to withstand min. 15mA and min. 15V DC, both of which are applied by MIM-B16N.
 Even though MIM-B16N interface circuitry is realized with electric isolation components, it’s highly recommended that interface
circuitry of an electricity meter be designed with isolation to ensure robustness from contact spike or electric interference
during wiring.

1VMTFHFOFSBUJPOGSPN
electricity meter
Current flow(max. 15mA)
Current flow
Current source
Current sink
20~1000ms
Waveform of CH1~8
Over 4ms
[¥]UwGG¥UGGGXZW YWX[TW[TY\GGG㝘䟸G[aZ]aY`