Samsung MCM-A300N - Wiring

Control Systems
132
IVIV
Power distribution system
1. Electricity meter interface module
7) Wiring
f Wiring to electricity meter
t Attention must be paid to make polarized connection between an electricity meter and MIM-B16N with correct specifications
on wires.
f Wiring to DMS2
t Make sure that communication cable is wired between DMS2 and MIM-B16N with the right polarity.
f Caution
t MIM-B16N can be connected with outdoor units/controllers to same channel of DMS2.
󱀣 MIM-B16N
++ + +
+
+
+
ABAB
MIM-B16N
Typical interface circuitry
Cable : 6OTIJFMEFEXJSFNN
2
VCTF or equivalent
Length :.BYN
1VMTFUZQFFMFDUSJDJUZNFUFS
%.4.*.%"/
MIM-B16N
 to another MIM-B16N
Cable : 6OTIJFMEFEXJSF_NN
2
VCTF or equivalent
Length : .BYN
Ex) %.4$)1*.0VUEPPSVOJU0
1*.5PVDIDPOUSPMMFS0
J DM2, Outdoor unit or Controller should be new communication applied products.
J MIM-B16N should be connected to dedicated channel of DMS2.
[¥]UwGG¥UGGGXZY YWX[TW[TY\GGG㝘䟸G[aZ]aZX