Samsung MCM-A300N - System Reset

31
I
NDIVIDUAL
C
ONTROL
S
YSTEMS
Main
menu
4VC
menu
Function Default value
1BHF
in use
3BOHF
5
1
$IFDL
Set option
function of
the wired
remote
controller
4FUJOEPPSVOJUGPShDPPMJMOHBOEIFBUJOHh
'cooling only'
01
0- Cooling and heating, 1-Cooling
only
2
Setting wireless remote controller usage
restriction
1 1 0 - Disable, 1 - Enable
3 4FUUJOH.BTUFS4MBWFXJSFESFNPUFDPOUSPMMFS 0 1 0-Master, 1-Slave
4 Setting auto operation usage 1 1 0 - Disable, 1 - Enable
5 5FNQFSBUVSFEJTQMBZ$FMTJVT¡$'BISFOIFJU¡' 01$FMTJVT¡$'BISFOIFJU¡'
6
Set unit for desired temperature (0,1,2) (Only available
XIFOUFNQFSBUVSFJTEJTQMBZFEJO$FMTJVT¡$
01¡$¡$¡$
Press and hold for over
5 seconds Power reset
Press and hold for over 5 seconds
All connected indoor units will be set as Master indoor unit
Press and hold for over 5 seconds
All Master indoor unit setting will be canceled
SFUUJOHNPEFNBTUFSJOEPPSVOJU
System reset
F1/F2
F3/F4
Wired remote controller
Indoor unit
Outdoor
unit
t Only when the wired remote controller is connected to an indoor unit directly
(1:1 connection), you can set the mode master indoor unit that sets the
operation mode of the outdoor unit.
t Reset the power of the simplified wired remote controller