Samsung MCM-A300N - 2 DMS B-Net(Bacnet GW); Description of Parts

63
C
ENTRALIZED
C
ONTROL
S
YSTEMS
3) Description of parts
No.
Name
Description
①
LCD On/Off button and
Indoor unit operation indicator

Button : Turn on/off the LCD screen

Indicator
- Blue : Turns on if any one of the indoor unit is in operation.
- Red : Turns on if nay one of the indoor unit has an error
②
SD card slot
Use to back-up data on SD card or updating S/W
③
Power terminal $POOFDU"$_7)[QPXFS
④
Reset button
Use to reset Touch centralized controller
⑤
DI-1 terminal Terminal block for connecting digital input signal from 3rd party device.
⑥
DI-2 terminal Terminal block for connecting digital input signal from 3rd party device.
⑦
DO Terminal
 Terminal block for digital output signal.
- Short : When any one of indoor units turns On
- Open :When all indoor units are off
⑧
485 communication terminal
 8IFODPOOFDUJOHUPTFUMBZFS$POOFDUUPPVUEPPSVOJUPSJOEPPSVOJU''
 8IFODPOOFDUJOHUPDPOUSPMMBZFS$POOFDUUPPVUEPPSVOJU0O0GGDPOUSPMMFS5PVDIDFOUSBMJ[FE
controller or DMS2 (R1/R2)
③
①
⑥
⑤
②
④
⑦
⑧
Compatible product
7 Conventional communication outdoor unit requires interface module (MIM-N01) to establish connection
7 MIM-B13D, MIM-B13E, MIM-B04A Interface modules cannot be connected.
7 To connect ERV, MIM-N10 interface module is required.
Outdoor unit AM7777X777777
Controller
OnOff controller (MCM-A202DN)
Touch centralized controller (MCM-A300N)
DMS2 (MIM-D00AN)
BACnet gateway (MIM-B17N)
Lonworks gateway (MIM-B18N)