PREPARING THE I
NSTALLATION
E-8
Deciding on Where to Install the Indoor Unit
Indoor Unit
e
rom
r
o 0.2 inch
e
rom
ro
0.2 inch
There must be no obstacles near the air inlet and outlet.
Install the indoor unit on a ceiling that can support its weight.
Maintain sufficient clearance around the indoor unit.
Make sure that the water dripping from the drain hose runs away correctly
and
safely.
The indoor unit must be installed in this way, that they are out of public
access.
(Not touchable by the users)
After connecting a chamber, insulate the connection part between the indoor
unit
and the chamber with t10 or thicker insulation. Otherwise, there can be
air
leak or dew from the connection part.
Space Requirements for Indoor Unit
Inhaling from the back : 59.1 inch x 23.6 inch or more
Inhalin
g
from the bottom : 59.1 inch x 31.5 inch or more
(Refer to page 8)