E-102
14
14
Select compound factor setting usage.
X
You can use compound factor setting when you give conditions to 2 and 3 input
items.
X
You can select 1 compound factor from 'AND' and 'OR'.
X
Select 'AND' if all the input items each should be ‘True'.
X
Select 'OR' if just 1 input item needs to be 'True'.
X
Compound factor has priorities in order.
For example, if you set 'OR', 'AND' in order, it means ‘(input item 1 OR input item 2)
AND input item 3’.
After selecting the compound factor, you must tick the check box on the left side.
15
Select ‘Select a factor’ in the Output list.
15
Control Logic Management (Continued)
To Next Page
Loading...
