E-126
DMS2.5 Network Information Setting – “Manual Setting”
You can set and check information about DMS2.5 installation operation.
1
Click [System Settings]
£
[System environment setting] when DMS2.5 web
page menu screen appears.
2
Click [Edit] from DMS2.5 network information window.
3
When text boxes of IP address, subnet mask address, default gateway and DNS
server are enabled, enter values for each item.
X
15 letters can be entered for each item.
X
Each item should match with the network address form.
X
Basically, only Private IP can be set to IP address. To use Public IP, you must
set Enable public IP as ‘Enable’ from the menu [System Settings] £ [System
environment setting].
- Private IP range: 10.0.0.0 ~ 10.255.255.255, 172.16.0.0 ~ 172.31.255.255,
192.168.0.0 ~ 192.168.255.255
- P
ublic IP range: IP except for Private IP range and 127.0.0.1(localhost)
4
Click [Save] in DMS2.5 network information window.
5
Click [OK] when “This operation needs web browser restart. The browser will
be closed. Do you want to proceed?” message appears.
X
Click [OK] and current web browser will be closed. Run the web browser
again and you can access to DMS2.5 using IP which is manually set.
1
3
2
4
5
System Settings (Continued)
To Next Page
Loading...
