E-127
DMS2.5 Network Information Setting – using “DHCP”
1
Click [System Settings]
£
[System environment setting] when DMS2.5 web page menu
screen appears.
2
Click [Edit] from DMS2.5 network information window.
3
Check 'DHCP'.
X
The text boxes of IP address, subnet mask address, default gateway and DNS server
will be disabled.
X
If you want manual setting, uncheck 'DHCP' and then refer to “DMS2.5 Network
information setting-manual setting” steps. (Refer to page 126)
X
DMS2.5 supports DHCP. Only private IP should be assigned from DHCP. If Public IP is
assigned from DHCP, you cannot access DMS2.5.
X
If Public IP must be assigned from DHCP, you must set Enable public IP as ‘Enable’
from the menu [System Settings] £ [System environment setting].
4
Click [Save] in DMS2.5 network information window.
5
Click [OK] when “This operation needs web browser restart.
The browser will be closed. Do you want to proceed?” message appears.
X
Click [OK] and current web browser will be closed. Run the web browser again and
you can access to DMS2.5 after checking auto setting IP in the external LCD.
1
3
2
4
5
Some functions available on DMS2.5 web page may not be
functional at BACnet Gateway and LonWorks Gateway. For
detailed function, refer to the installation manual or contact
Samsung Electronics.
To Next Page
Loading...
