E-27
3
3
Set operation mode limit.
X
You can select [coolonly (Cool)], [heatonly (Heat)], and [No limits].
- No limits : You can use cool mode and heat mode with no limits.
Note
X Operation mode limits setting is not available in ERV and DVM CHILLER.
X
If you set the operation mode limit, DMS2.5 will automatically change the
operation mode limit setting of all the indoor units connected to same outdoor
unit.
X
If the indoor unit is cooling only model, you cannot set the operation mode limit to
'heatonly'.
To Next Page
Loading...
