E-28
Control and Monitoring (Continued)
You can monitor the operation status of all indoor units, and
control the indoor units as a whole, or as individual units.
1
Click [Control and Monitoring] when DMS2.5 web page
menu screen appears.
X
[Control and Monitoring] screen will appear when you
log-in to DMS2.5 web page.
2
Select an indoor unit to control.
X
Check the indoor unit status through status display window.
X When the selected indoor unit is switched on, the remote
controller panel will be automatically activated.
Setting Lower/Upper Temperature Limit of an Indoor Unit
2
1
Status display window
To Next Page
Loading...
