Samsung MIM-H02 - Page 9

8
How to install Wi-Fi kit
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Use of external
temperature sensor
Use of central control or
Wi-Fi kit
RESERVED
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
0 2
0 Disuse 0 Disuse
1 Use 1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Use of drain pump
RESERVED RESERVED RESERVED
Master / Slave
Indication
and Details
Indication Details Indication Details
Indication Details
1
0 Disuse
0 slave
1 Use
1 master
2
Use +
3minute
delay
- -
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE
Use of external
control
Setting the output of
external control
S-Plasma ion Buzzer control
Number of hours
using filter
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
2
0 Disuse 0
Thermo
on
0 Disuse 0 Use of buzzer 2 1000 Hour
1
ON/OFF
Control
1
Operation
on
1
Use 1
Non use of
buzzer
6 2000 Hour
2
OFF
Control
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE
control of a remote
controller
Heating setting
compensation
RESERVED
Motion detect sensor
RESERVED
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
3
0 or 1 Indoor 1 0 Disuse
0. No Use (Factory Setting)
1. Standard Mode/Auto
Set OFF30 Min.
2. Standard Mode/Auto
Set OFF60 Min.
3. Standard Mode/Auto
Set OFF 120 Min.
4. Standard Mode/Auto
Set OFF 180 Min.
5. Premium Mode/
Auto Set OFF30 Min.
6. Premium Mode/
Auto Set OFF60 Min.
7. Premium Mode/Auto
Set OFF 120 Min.
8. Premium Mode/Auto
Set OFF 180 Min.-
2 Indoor 2 1 2°C
3 Indoor 3
2 5°C
4 Indoor 4
5. Press the button to save and complete the option setting.
6. Press the button to exit to normal mode.
• Press button anytime during setup to exit without setting.
• Option code will not be applied if you don't press
button.
• Setting Installation option code is available only with a master wired remote controller.
• Setting Installation option code is available when there is one on one connection between a wired remote
controller and an indoor unit.
NOTE
CAC WiFi Kit APP_03384A(1).indd 8 2012-10-12 오후 3:37:11