Samsung ML-2015/XEV - Paper Path Frame

Disassembly and Reassembly
Samsung Electronics
Service Manual
5-13
5.2.12 Paper Path Frame
1. Before Disassembling
-Separate the font cover.(Refer to 5.2)
-Separate the SMPS cover.(Refer to 5.3)
-Separate the Main cover.(Refer to 5.4)
-Separate the Fuser.(Refer to 5.8)
-Separate the Engine shield.(Refer to 5.9)
2. After releasing 4 screws as shown as below, take it
out toward the arrow direction with carefulness of
ground and harnesses.
(Screw x 4:Silver_M3,6003-000196)
3. After releasing the 2 hooks from the right side of the
frame,take out the transfer roller.
(Screw x 2:Silver-M3,6003-000196)
4. Remove the solenoid-MP by releasing the screw from
the left side of the frame.
(Screw x 1:Gold_M3,6003-000301)
Paper Path Frame
Transfer Roller
2
1
Bush(L)
Bush
Solenoid-MP
Mirco S/W