Service Manual
Alignment & Adjustments
4-2
Samsung Electronics
4.1.3 Cover Status
This function is to check all cover sand all doors status.
• Usage
1. Press the
Arrow Keys ( ) until finding Component Test / 1.Cover Status message on the panel.
2. Press the
OK Key , when it is found.
3. Press the
Arrow keys until finding a suitable function (Refer to the table below).
4. Press the
OK Key , when it is found.
5. Press the
OK Key for execution or the Back key for return.
• Function
• The procedure and content above can be changed according to the situation.
Function Name Description Display(LCD) Remarks
Top Cover If the cover is opened, Open message will be Top Cover
displayed and if not,
Closed displayed. [Closed]/[Open]
Tray1 Cassette If the Tray is opened,
Open message will be Tray1 Cassette
displayed and if not,
Closed displayed. [Closed]/[Open]
Tray2 Cassette If the Tray is opened,
Open message will be Tray2 Cassette
displayed and if not,
Closed displayed. [Closed]/[Open]
Tray3 Cassette If the Tray is opened, Open message will be Tray3 Cassette
displayed and if not,
Closed displayed. [Closed]/[Open]
Tray4 Cassette If the Tray is opened,
Open message will be Tray4 Cassette
displayed and if not,
Closed displayed. [Closed]/[Open]
Fuser Door If the Door is opened, Open message will be Fuser Door
displayed and if not,
Closed displayed. [Closed]/[Open]
To Next Page
Loading...
