Disassembly and Reassembly
Service Manual
5-25
Samsung Electronics
5.24 REGI Ass'y
1. Before you remove the REGI Ass'y, you should
remove:
- Top Cover (Refer to the 5.15)
2. Unplug the Harness and remove four screws, as
shown below.
3. Release the lock as shown below and lift up the Gear
Cap.
4. Take out the REGI Ass'y, as shown below.
5. Unplug the Harness, remove the screw and take out
the PTL PBA.
To Next Page
Loading...
