Before Starting (Initial Setting)
1. Press the POWER button when it is plugged in
TV for the first time.
Initial Setting screen will be displayed.
2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
3. Press the ▲▼ buttons to select desired TV Aspect,
then press the ENTER button.
✎ NOTE
` To move to the previous screen, press and hold the
RED(A) button.
` Once you selected a menu language, you can change it
by pressing the STOP (@) button on the front panel for
more than 5 seconds with no disc inserted.
` When the Initial Setting screen does not appear, refer to
Initial Setting. (see page 19)
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the firmware version.
1
HOME BUTTON : Display the home menu.
2
RETURN BUTTON : Return to the previous
setup menu.
3
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
4
EXIT BUTTON : Exit the setup menu.
1. In NO DISC mode, or during playback, press
STOP button twice.
2. Press the
_+
buttons to select Settings, then
press the ENTER button.
3. Press the
▲▼
buttons to select desired menu,
then press the ENTER button.
4. Press the
▲▼
buttons to select desired
sub-menu, then press the ENTER button.
5. Press the
▲▼
buttons to select desired item,
then press the ENTER button.
6. Press the EXIT button to exit the setup menu.
Function DVD/CD
Settings
Move Select
Initial setting | On-Screen Language
Select a language for the on-screen displays.
English
한국어
Nederlands
Fran
ç
ais
Deutsch
Italiano
1
2
4
3
To Next Page
Loading...
