English 27
04 Basic Functions
Listening to Radio
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
• Preset Tuning : Press the STOP button to
select FMXX and then press TUNING
,
,
.
buttons to select the preset station.
• Automatic Tuning : Press the STOP button
to select MANUAL and then press and hold
the TUNING
,
,
.
button to automatically
search for active broadcasting stations.
• Manual Tuning : Press the STOP button to
select MANUAL and then briefly press the
TUNING
,
,
.
button to increase or decrease
the frequency.
Using buttons on the product
1. Press the F
button to select FM.
2. Select a broadcast station.
• Preset Tuning : Press the STOP ( @ ) button
to select FMXX and then press the
[ ]
buttons
to select the preset station.
• Automatic Tuning : Press the STOP ( @ )
button to select MANUAL and then press and
hold the
[ ]
buttons
to automatically
search the band.
• Manual Tuning : Press the
STOP ( @ )
button
to select MANUAL
and then press the
[ ]
buttons
to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the
sound switches between STEREO and
MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
✎ NOTE
` This applies only when listening to an FM
station.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the STOP ( @ )
button on the top panel
to
select <MANUAL> mode.
3. Press the
[ ]
button
on the top panel
to
select <89.10>.
4. Press the ENTER button.
• Number flashes on the display.
5. Press the
[ ]
buttons on the top panel
to
select preset number.
• You can select between 1 and 15 presets.
6. Press the ENTER button again.
• Press the ENTER button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune to a preset station, press the
[ ]
on
the top panel to select a channel.
✎ NOTE
` You can also use
TUNING
,
,
.
buttons
on the remote
control
instead of
[
or
]
buttons in step 3,5,7
.
MO/ST
To Next Page
Loading...
