145
7. Scanning
Understanding the scan methods
To use the scanning feature, press Scan to Email, Scan to USB, Scan to Server,
Scan to PC, or Scan to Shared Folder on the display screen.
If a different screen is displayed, press ( ) to go to the home display screen.
• Scan to Email: Scans and sends scanned output to the destination by e-mail
(see "Scanning and sending through email" on page 146).
• Scan to Server: Scans and sends scanned output to the destination with
SMB or FTP (see "Scanning and sending via SMB/FTP" on page 152).
• Scan to PC: Scans and sends scanned output to a computer (see "Scanning
and sending to your computer" on page 158).
• Scan to Shared Folder: Scans and stores scanned output in the shared
folder (see "Scanning and sending to USB /shared folder" on page 160).
This option is available when the mass storage device (hard disk) installed.
• Scan to USB: Scans and stores scanned output onto a USB memory device
(see "Scanning to a USB memory device" on page 231).
If you want to use this feature, you need to insert a USB memory device into
the USB memory port on your machine.
To Next Page
Loading...
Need help?
General