Scanning and sending through email
149
7. Scanning
11
Press Apply.
• If the authentication method of SMTP server is POP3 before SMTP, put a
check mark of SMTP Requires POP Before SMTP Authentication.
• Enter the IP address and port number.
3
Scanning and sending an email
You can scan originals and send the scanned image to several destinations from
the machine by email
To scan and send an image as an email attachment, you need to set up
network parameters, SMTP settings and Scan to Email settings using the
control panel or SyncThru™ Web Service (see "Setting up an email account"
on page 148).
1
Place the originals face up in the RADF or place a single original face
down on the scanner glass and close the RADF (see "Loading originals"
on page 72).
2
Press Scan to Email from the display screen.
3
Set the scan features in the Advanced, Image, or Output tabs.
4
Press the Basic tab.
To Next Page
Loading...
