Receiving a fax
185
8. Faxing (Optional)
1
Press Machine Setup > Application Settings > Fax Settings > Secure
Receive from the display screen.
The Secure Receive mode can only be configured by an authorized user
who has registered an ID and a password on the machine. When the
machine requests, enter the ID and password.
2
Press a fax line if your machine has multiple fax lines.
3
Press On to active this feature.
When the machine receives a fax in this mode, Print will be activated. If you
want to print the secured faxes, press Print. All secured faxes will be printed
out.
4
If you want to Passcode setting, press Passcode blink then input the
Passcode.
5
If you want incoming faxes to go into memory always, press Whole Day.
Otherwise, go to the next step.
6
Set Start Time by pressing the + and - buttons. Press OK.
7
Press End Time, and set the specific end time using the + and - buttons.
8
Press OK from the display screen.
To deactivate the Secure Receive feature, press Off. In this case, the
received fax will be printed out.
To Next Page
Loading...
Need help?
General