To Next PageTo Next PageWhat to do if my Samsung Ranges appliance will not turn on?
If your Samsung range isn't turning on, first ensure that the power cord is properly plugged into a grounded outlet. Then, check your home's fuse box or circuit breakers to see if a fuse has blown or a breaker has tripped; replace the fuse or reset the breaker if needed.
Why does the display flash on my Samsung NE58F9710WS?
If the display on your Samsung Ranges flashes, it indicates there was a power failure. Reset the clock to resolve the issue.
Why Samsung Ranges food does not bake or roast properly?
If food isn't baking or roasting properly in your Samsung Ranges, the oven controls might not be set correctly. Refer to the chapter on operating the oven. Also, check that the oven rack is positioned correctly and is level; see the section on using oven racks. Finally, the oven sensor may need adjustment; see the section on adjusting the thermostat.
Why is the oven temperature too hot or too cold in my Samsung NE58F9710WS Ranges?
If your Samsung Ranges oven temperature seems too hot or cold, the oven sensor may need adjustment. Consult the section on adjusting the thermostat.
What to do if the oven door will not open after a self-cleaning cycle on my Samsung NE58F9710WS Ranges?
If the oven door on your Samsung Ranges won't open after a self-cleaning cycle, it's likely because the oven is still too hot. Allow the oven to cool down completely before attempting to open the door.
Why does food dry out in the warming drawer of my Samsung Ranges?
If food is drying out in the warming drawer of your Samsung Ranges, it may be due to moisture escaping. Make sure to cover the food with a lid to retain moisture. Also, ensure that the drawer is fully closed so the latch engages properly.
Why Samsung NE58F9710WS surface units will not maintain a rolling boil?
If the surface units on your Samsung Ranges aren't maintaining a rolling boil or cooking food fast enough, make sure you're using flat pans that match the diameter of the surface unit. If the power (voltage) in your area is low, cover the pan with a lid to help retain heat until the desired temperature is reached.
What to do if my Samsung NE58F9710WS Ranges oven control beeps and displays an error code?
If your Samsung Ranges oven control is beeping and displaying an error code, press Oven Off and restart the oven. If the issue continues, disconnect the power to the range for at least 30 seconds, then reconnect it. If the problem persists after this, call for service.
Why does the display go blank on my Samsung NE58F9710WS Ranges?
If the display on your Samsung Ranges goes blank, a fuse in your home may be blown, or the circuit breaker may have tripped. Replace the fuse or reset the circuit breaker.
What to do if my Samsung Ranges oven will not turn on?
If your Samsung Ranges oven isn't turning on, ensure the range is fully plugged into a working, grounded electrical outlet. Check your home's fuse box or circuit breaker and replace any blown fuses or reset tripped breakers. Also, verify that the oven controls are properly set. Finally, if the oven is too hot, allow it to cool down before attempting to turn it on.
General| Style | single oven, slide-in |
|---|---|
| Color | stainless steel |
| Total Capacity | 5.8 cubic feet |
| Options | delay bake option, time bake, timer, variable broil |
| Cooking Programs | convection, bake, roast, broil |
| Convection | multi-fan |
| Induction | no |
| Number of Burners / Elements | 5 |
| Number of Oven Racks | 3 |
| Number of Oven Rack Positions | 7 |
| Control Type | knob, touchscreen |
| Interior Light | yes |
| Child Lock | yes |
| Smart Home | no |
| Fuel | electric |
| Voltage | 240 volts |
| Current | 40 amperes |
Weight and Dimensions| Depth | 26 5/16 inches |
|---|---|
| Height | 37 13/100 inches |
| Width | 29 41/50 inches |
| Net Weight | 95 pounds |
