Why does the display go blank on my Samsung Range?
If the display on your Samsung Range goes blank, a possible cause is a blown fuse or tripped circuit breaker in your home. Replace the fuse or reset the circuit breaker to resolve this.
What to do if the oven control beeps and displays an error code on my Samsung Range?
If the oven control on your Samsung Range beeps and displays an error code, it indicates a function error. Here’s how to address it: * Press OVEN OFF and restart the oven. * If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. * If this does not solve the problem, call for service.
What to do if the cooktop control beeps and displays an error code on my Samsung Range?
If the cooktop control on your Samsung Range beeps and displays an error code, it indicates a function error. To resolve this: * Turn off the knob and set again. * If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. * If the issue continues after these steps, call for service.
Why does the surface unit stop glowing when changed to a lower setting on my Samsung Ranges?
If your Samsung Range's surface unit stops glowing when changed to a lower setting, this is normal. The unit is still on and hot.
What to do if the surface units will not turn on in my Samsung Ranges?
If your Samsung Range's surface units won't turn on, first, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. If that's not the issue, make sure the cooktop controls are correctly set for the surface unit you're trying to use.
What to do if my Samsung NE58H9970WS/AA oven is not clean after self-cleaning?
If your Samsung Range oven is not clean after a self-cleaning cycle, it could be due to incorrect control settings or a heavily soiled oven. See the section on self-cleaning. Wipe up heavy spillovers before starting the self-cleaning cycle. Heavily soiled ovens may need to be self-cleaned again or for a longer period of time.
Why is the oven temperature too hot or cold in my Samsung NE58H9970WS/AA?
If your Samsung Range oven temperature is too hot or cold, the oven sensor may need adjustment. See the section on adjusting the thermostat.
What to do if the oven door will not open after a self-cleaning cycle on my Samsung Ranges?
If the oven door on your Samsung Range won't open after a self-cleaning cycle, it's likely because the oven is still too hot. Allow the oven to cool down completely before attempting to open the door.
Why is my food not broiling properly in my Samsung Ranges?
If food isn't broiling properly in your Samsung Range, it could be due to incorrect oven control settings, improper rack position, unsuitable cookware, or low voltage. Press BROIL. Refer to the broiling recommendation guide. Use suitable cookware. Preheat the broil element for 10 minutes.
Why is my food not baking properly in my Samsung NE58H9970WS/AA Ranges oven?
If your food isn't baking or roasting properly in your Samsung Range, it could be due to incorrect oven control settings, improper rack position, or the oven sensor needing adjustment. Refer to the chapter on operating the oven. Check the section on using the oven racks. See the section on adjusting the thermostat.
General| Fuel Type | Electric |
|---|---|
| Cooktop | Yes |
| Cooktop Surface | Ceramic Glass |
| Number of Burners | 5 |
| Oven Capacity | 5.8 cu. ft. |
| Convection Oven | Yes |
| Self-Cleaning | Yes |
| Wi-Fi Connectivity | Yes |
| Color | Stainless Steel |
| Width | 29.875 inches |
To Next Page