What to do if my Samsung NQ70T5511DG Oven displays 'bAd LinE' error?
The 'bAd LinE' error message appears when the power connection is improperly installed. To resolve this, disconnect the power, then reconnect the power connection correctly. This should make the message disappear.
How to fix a Samsung NQ70T5511DG showing a C-21 error?
The C-21 error code indicates that the internal temperature has risen abnormally high. To fix this, touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
What to do if my Samsung NQ70T5511DG is showing a C-d1 error?
The C-d1 error code appears if the door lock is mispositioned. To solve this, touch OVEN OFF, and then restart the oven. If the problem continues, disconnect all power to the oven for at least 30 seconds and then reconnect the power.
Why does my Samsung NQ70T5511DG Oven display a C-d0 error, and how can I fix it?
The C-d0 error code appears if a control key is short for 1 minute. Clean the buttons and ensure there is no water on or around them. Turn off the oven and try again.
General| Style | double |
|---|---|
| Color | black stainless steel |
| Total Capacity | 7 cu. ft.; 1.9/5.1 cu. ft |
| Microwave | yes; 1.9 cu. ft. |
| Convection | standard; yes |
| Racks | 2 |
| Control Type | touchpad |
| Interior Light | yes |
| Remote Control | yes |
| Wi-Fi | yes |
| Kitchen Timer | yes |
| Voltage | 240/208 volts |
| Current | 30 |
Weight and Dimensions| Depth | 26 5/8 inch |
|---|---|
| Height | 43 1/4 inch |
| Width | 29 3/4 inch |
| Net Weight | 222.7 lbs |
Guidelines for safe handling and use of related equipment with the oven.
Instructions for safely moving and transporting the oven unit.
A step-by-step checklist to ensure all installation requirements are met.
Steps and materials needed before proceeding with oven installation.
List of tools and materials required for the installation process.
Specifications and guidelines for the oven's installation location.
Detailed dimensions and measurements for the combination oven.
Dimensions and clearances required for cabinet installation of the oven.
General guidelines for connecting the oven to the power supply.
Table detailing the electrical power (VAC/kW) requirements for the oven.
Steps to prepare the oven unit before installing it into the cabinet.
Detailed guide on how to remove and reinstall the oven door.
Procedure for safely reattaching the oven door to the unit.
Further details and options for electrical wiring and connection to the power source.
Chart detailing wiring options for 4-wire and 3-wire home power supplies.
Specific instructions for connecting a 3-wire power cable.
Steps to physically place the oven into the cabinet cutout.
Final steps to push the oven into the cabinet and fasten it securely.
Instructions for attaching the metal bottom trim to the oven.
Procedure for checking the oven's temperature sensor and heating elements.
Table of error codes and their corresponding remarks for self-diagnosis.
Guide to understanding and resolving oven error codes and messages.
List of displayed error codes with possible causes and solutions.
To Next Page