Tone and Ring Signal
● DIAL TONE indicates you can begin dialing.
CONTINUOUS
● RING BACK TONE indicates the station you dialed is ringing.
400 ON / 200 OFF /
400 ON / 3000 OFF
● BUSY TONE indicates the station you dialed is busy.
500 ON / 500 OFF /
500 ON / 500 OFF
● TRANSFER TONE indicates your call is being held and you can dial
another party.
200 ON / 200 OFF /
200 ON / 200 OFF
● ERROR TONE indicates you have done something incorrectly.
500 ON / 250 OFF /
500 ON / 250 OFF
● CONFIRMATION TONE indicates you have correctly set or canceled a feature.
100 ON / 100 OFF /
100 ON / 100 OFF
● INTRUSION TONE indicates you are barged-in on.
200 ON / 220 OFF /
200 ON / 5000 OFF
● MESSAGE WAITING TONE indicates you have messages waiting. (SLT)
200 ON / 200 OFF /
200 ON / 200 OFF
● CAMP-ON REMINDER TONE Indicates another call was transfered to
you while busy.
1000 ON / 15000 OFF /
1000 ON / 15000 OFF
● CO LINE RING indicates an outside call is ringing on your station.
1000 ON / 3000 OFF /
1000 ON / 3000 OFF
● STATION RING indicates an intercom call is ringing on your station.
400 ON / 200 OFF /
400 ON / 3000 OFF
● DOORPHONE RING indicates a door phone call is ringing on your station.
500 ON / 500 OFF /
500 ON / 500 OFF
● ALARM RING indicates an alarm is ringing on your station.
500 ON / 500 OFF /
500 ON / 500 OFF
NOTE: The details may vary according to the regulations or customers reguest.
GENERAL INFORMATION
9
본문 1999.9.15 12:32 PM 페이지11
To Next Page
Loading...
