number or trunk group number and the station number and station
passcode. After hearing the dial tone, make the outside call.
Using Add-On Module
NX-series' unique Add-On Module (AOM) adds to the capability of any
station. Its 24 programmable buttons can be used as feature keys, DSS/BLF
keys, or one-touch Speed-Dial buttons.
1. Connect the Add-On-Module (AOM) to the keyset port.
2. Using MMC 37, set the AOM master.
3. Program the keys with MMC 71 SYSTEM KEY PROGRAMMING.
(Refer to the Technical manual)
APPENDIX 1Keyset users may customize programmable keys using
system programming.
The following are programmable feature keys:
ACC Account code GPC Group Pickup
ALM Set Alarm HED Headset mode
AMD Answer Mode IOG Group In/Out
ARD Auto Redial LNR Last Number Redial
BRG Barge-In MPG Meet Me Page
CBK Callback MSG Message
CMP Camp-on MUT Mute
CNF Conference NIT Night mode
DND Do Not Disturb OPR Operator group
DOR Door PAG Page
DPC Direct Pickup PSE Pause Dialing
EXC Boss/Secretary SNR Saved Number Redial
FAT Forced Auto Answer SPD Speed-Dialing
FLS Flash TMR Timer
FWA Call Forward All TRN Transfer
FWB Call Forward Busy UPC UNA Pickup
FWN Call Forward No answer VAC Vacant Message
SPECIAL FEATURES
37
본문 1999.9.15 12:32 PM 페이지39
To Next Page
Loading...
