Samsung NX Series - MMC 00 Station Lock; MMC 01 Station Passcode; MMC 10 Answer Mode; MMC 11 Call Forward

00 Station Lock If you want to prohibit another user from using
your station, you can lock or unlock your station
with this MMC.
01 Change User Passcode This is used to change your station
passcode. The station passcode is used
to lock or unlock the keyset.
10 Answer Mode This is used to change answer mode of the station.
·To set Ring Mode
·To set Auto Answer Mode
·To set Voice Announce Mode
11 Call Forward Use to program the call forward destination and
forwarding type.
To set Call Forward
USER PROGRAMMING
40
station
passcode
(4 digits)
1 to set LOCKED1
2 to set LOCKED2
0 to unlock
old station
p a s s c o d e
(4 digits)
new station
p a s s c o d e
(4 digits)
new station
p a s s c o d e
a g a i n
station number
or station group
n u m b e r
Using [VOLUME], select call
forwarding type(Forward All,
Forward Busy, Forward No
A n s w e r )
본문 1999.9.15 12:32 PM 페이지42