4. To retrieve the call placed on hold, press [1][1].
·If you know the outside line number placed on hold, you can
dial [1][0] and the outside number to retrieve the call.
NOTE:
If the held line is not released within a predetermined time, the
system rings you back so that you do not forget about the call. If you
do not answer the call, it is automatically recalled to the operator
group. (Operator group is the station group numbered 500)
Exclusive Hold
To place a call on hold at your phone and not allow another user to take it,
use Exclusive Hold.
To Place an Outside Call on Exclusive Hold
Keyphone
1. When connected to an outside line, press [HOLD] twice.
·The outside line placed on hold will blink green at your keyset,
and show a steady red light on all other keysets.
2. After placing a call on hold, you can answer or make another call.
3. To retrieve the held outside line, press the blinking line button.
NOTE:
·You must press 2nd [HOLD] within 2seconds after pressing
[HOLD] the first time (Step 1).
·If a held line is not released within a predetermined time, the
system rings you back, so that you do not forget about the call.
If you do not answer the call, it is automatically recalled to the
operator group. (Operator group is station group numbered 500)
To Place an Intercom Call on Exclusive hold
Keyphone
1. When connected to a station, press [HOLD] once.
·The station's [DSS] button will blink red on your keyset.
2. After placing a call on hold, you can answer or make another call.
3. To retrieve the held station call, press the blinking [DSS] button.
CALL PROCESSING
14
본문 1999.9.15 12:32 PM 페이지16
To Next Page
Loading...
