Transferring Calls
This feature allows you to transfer a call to another station or group. Any
outside or intercom call may be transferred, regardless of whether you
initiated or received the call.
When you transfer a call, you may wait on the line and announce the call, or
you may hang up when you hear the ringback tone. The connection
between the caller and the person to whom the call is being transferred is
completed when you hang up.
Keyphone
1. With an outside call in progress, press the [DSS] button for the
station to which you want to transfer the call.
·You hear a transfer tone and the other party hears music.
Or, with intercom or outside call in progress,
press [TRANSFER], and dial the station or group number.
·To transfer the call to the operator, dial [0].
* Dial 0 is replaced to dial 9 for other countries, South Africa etc.
2. Replace the handset.
Or, wait on the line and announce the call, then replace the handset.
·If the transfer to station is busy, press [TRANSFER] again.
You will be reconnected to the original call.
Standard phone
1. With intercom or outside call in progress, hook flash.
2. Dial the station number or group number to which you want to
transfer the call.
·If you want to transfer the call to the operator group, dial [0].
* Dial 0 is replaced to dial 9 for other countries, South Africa etc.
3. Replace the handset.
·If the transferred station is busy, hook flash again.
You will be reconnected to the original call.
CALL PROCESSING
15
본문 1999.9.15 12:32 PM 페이지17
To Next Page
Loading...
