Standard phone
1. Lift the handset.
2. Dial [1][7].
Automatic Redial
Keyphone
1. When placing an outside call and you receive a busy signal, press
[ARD] before hanging up if the button is programmed.
2. Replace the handset. Your phone will hold the line and redial the number.
·Your phone automatically disconnects from the line if no one
answers within a preprogrammed time (default 10 sec).
Your phone dials the number again, a preprogrammed time later,
for a preprogrammed number of times.
3. When the other party answers, lift the handset or press [ S P E A K E R ] .
NOTE:
· Be sure to cancel Auto-Redial if you leave the area of your phone.
· If you answer or make another call or perform other functions,
Auto-Redial is canceled.
Speed Dialing
You can dial a preprogrammed telephone number stored in your personal
list (numbers 00~19) or in the system-wide Speed-Dial list (numbers 20~99).
To Dial A Speed-Dial Number
Keyphone
1. Lift the handset or press [SPEAKER].
2. Press [SPEED] and dial the 2-digit Speed-Dial location where the
desired telephone number is stored.
DIALING FEATURES
22
본문 1999.9.15 12:32 PM 페이지24
To Next Page
Loading...
