What to do if my Samsung NX58F5500SS/AA-00 Ranges oven control beeps and displays an error code?
If your Samsung Ranges oven control is beeping and showing an error code, it indicates a function error. To resolve this: * Press the OVEN OFF pad and restart the oven. * If the problem continues, disconnect power to the range for at least 30 seconds, then reconnect it. * If the issue persists after these steps, it's best to call for service.
What to do if all burners on my Samsung NX58F5500SS/AA-00 do not light?
If none of the burners on your Samsung Ranges are lighting, check the following: * Make sure the power cord is properly plugged into a live, grounded electrical outlet. * Check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. * Ensure the gas supply is properly connected and turned on. Refer to the Installation Instructions that came with your range for guidance.
General| Type | Freestanding |
|---|---|
| Fuel Type | Gas |
| Oven Capacity | 5.8 cu. ft. |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Convection Oven | Yes |
| Color | Stainless Steel |
| Burner Types | Sealed |
| Ignition Type | Electronic |
| Warranty | 1 Year |
To Next Page