5-5
Wiring Diagram
5-4. Connector Functions
Loc. No. Functions
CN201
Adaptor supplies 14V to the Main Board.
• If it is out of order : No Power
CN1401
The Main Board sends an LVDS signal to the panel.
• If it is out of order : Blank Screen
CN1601
The LED driver circuit sends the LED drive current to the LEDs on the panel.
• If it is out of order : Blank Screen error may occurred.
CN901
It is connected to the Function Board.
• If it is out of order : No LED or Function failure error may occurred.
CN301
HDMI signal input connector
• If it is out of order : No HDMI Output error may occurred.
CN401
CN402
DisplayPort signal input connector
• If it is out of order : No DisplayPort Output error may occurred.
CN801 Headphone output connector
• If it is out of order : No Headphone Output error may occurred.
CN1101 Used to connect the PC using a USB cable.
CN1102
You can upgrade the software with a USB memory stick.
: High speed charging is possible.
To Previous Page
Loading...
