INTERCOM CALLS
CALLING OTHER STATIONS
• Dial the extension number or group number.
• Wait for the party to answer.
• If you hear several brief tone bursts instead of ringback tone, the
station you called is set for Voice Announce or Auto An swer.
• Begin speaking immediately after the tone.
• Finish the call by hanging up.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want to
wait for a callback:
• Dial ✱8 receive transfer tone and dial 45.
• The called station will receive off-hook ring or camp-on tone.
• You will hear ringback tone.
• Wait for the called party to answer.
The called station must release its first call or put it on hold before an swer ing your
camp-on.
CALLING YOUR SYSTEM OPERATOR
• Dial 0 to call your system operator or group of op er a tors.
• If you want to call a specific operator, dial that person’s ex ten sion num ber.
6
To Next Page
Loading...
