CONNECTING TO THE SYSTEM
For the remainder of this booklet instructions will assume that you are connect-
ed, logged in, and hearing a system dial tone. There are two ways to connect and
log in:
CONNECTING DURING A MOBEX CALL
When someone calls your office number and rings your Executive MOBEX phone
you can initiate the system connection by dialing the MOBEX feature access code,
typically ✱8. You will hear system dial tone if successful or, if no resources are avail-
able, you will be returned to your caller.
CONNECTING BY CALLING IN TO
THE SYSTEM
If the system administrator has allowed it, you may log in to the Executive MOBEX
interface by dialing in to the system. Your administrator will provide you with
instructions on what number to dial and which login method is used. The two
types of login methods are:
• AUTOMATIC: Meaning the system will automatically log you in based on
the C
aller ID of you Executive MOBEX phone, or
• MANUAL: Meaning the system requires you to log in based on your exten-
sion and passc
ode.
To log in manually:
• call in to the number provided by the administrator
• dial your extension number at the tone (or music)
• you will hear a short confirmation tone
3
To Next Page
Loading...
