Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting “Wide Zoom” mode:
Press the ► button to select ( ), then press the ENTER
E
button.
Press the ▲ or ▼ button to move the picture up and down.
After selecting “Zoom” mode:
Select ( ) by pressing the ◄ or ► button. Use the ▲ or ▼ button to move the picture up and down. After selecting ( ), use
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
After selecting “Screen Fit” in HDMI (1080i) or Component (1080i) mode:
Press the ◄ or ► button to select
, then press the ENTER
E
button.
Press the ▲, ▼, ◄ or ► button to move the picture up, down, left and right.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
E
button. You can initialize the setting to 16:9.
HD(HighDenition):
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
In PC Mode, only 16:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source Picture Size
TV, AV, Component (480i, 480p) 16:9, Wide Zoom, Zoom, 4:3
Component (1080i), HDMI (720p, 1080i) 16:9, Wide Zoom, Zoom, 4:3, Screen Fit
PC 16:9, 4:3
Digital NR
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
Off: Turns the Digital NR function off.
Low: Sets Digital NR to low.
Medium: Sets Digital NR to medium.
High: Sets Digital NR to high.
Auto: Sets Digital NR to Auto.
HDMI Black Level
You can directly select the black level on the screen to adjust the screen depth.
Normal: The screen gets brighter.
Low: The screen gets darker.
This function is active only when an external device is connected to the TV via HDMI.
HDMI Black Level function may not be compatible with all external devices.
Film Mode
The TV can be set to automatically sense and process lm signals from all sources and
adjust the picture for optimum quality.
Off: Basic video image processing applied and No auto-detection for lm-based
programs.
Auto: Automatically adjusts for the best image quality between lm and video programs.
Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).
Screen Burn Protection
Congures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Pixel Shift: Shift the picture to prevent and reduce pixel burn.
Optimum condition for pixel shift;
Item TV/AV/Component/HDMI/PC
Horizontal 0~4 2
Vertical 0~4 2
Time(min.) 1~4 Minute 2 Minute
Continued...
N
N
N
N
N
N
N
•
•
•
•
•
•
•
N
•
•
N
•
N
To Next Page
Loading...
