Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet
+
Menu Description
View TV Switches from Anynet+ to TV broadcast mode.
Select Device Your TV connects to the corresponding device.
Record Starts a recording. (This menu works only for a device supporting recording.)
Menu on Device Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
Device Operation Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder
appears.
Receiver Sound is output through the receiver.
Setup You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type Operating Status Available Buttons
Anynet
+
Device
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
Numeric buttons
▲/▼/◄/►/ENTER
E
buttons
Colour buttons / EXIT button
After switching to the device, while playing a file
(Backward search) / (Forward search) /
(Stop) / (Play) / (Pause)
Device with built-
in Tuner
After switching to the device, when you are watching a TV
programme
P / button
Audio Device When Receiver is activated
= / button
M MUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
In Anynet+ mode, the colour buttons may not work properly.
The , operations may differ depending on the device.
❑
❑
N
N
N
N
N
N
N
Recording
You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER
E
button to select Anynet+ (HDMI-CEC).
2.
Press the ▲ or ▼ button to select Record, then press the ENTER
E
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed. Press the ▲ or ▼
button to select a recording device and press the ENTER
E
button. Recording begins.
When the recording device is not displayed
Select Select Device and press the red button to search devices.
You can record the source streams by selecting Record.
Pressing the
button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to
a recording device, refer to the recording device’s users manual.
N
N
N
N
N
To Next Page
Loading...
