Setting the Time
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching
the TV. (Just press the INFO button.)
Time
1. Press the MENU button to display the menu.
2.
Press the ▲ or ▼ button to select Setup, then press the ENTERE button.
3.
Press the ▲ or ▼ button to select Time, then press the ENTERE button.
Clock Set
You can set the current time manually.
You can set the month, day, year, hour, minute directly by pressing the number
buttons on the remote control.
The current time will appear every time you press the INFO button.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(Off, 30, 60, 90, 120, 150 and 180 minutes).
Press the TOOLS button to display Tools menu.
You can also set the sleep timer by selecting Tools → Sleep Timer
T
Timer 1 / Timer 2 / Timer 3
Use this feature to set the TV to turn on or off at a desired time.
You must set the clock rst.
On Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Off Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, or Manual.
Volume: Set the required volume level.
Channel: Select the desired channel.
You can set the hour, minute and channel by pressing the number buttons on the
remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are
operated for 3 hours after the TV was turned on by the timer. This function is only
available in timer On mode and prevents overheating, which may occur if a TV is on
for too long time.
❑
N
N
•
•
•
•
•
N
N
To Next Page
Loading...
