Viewing the Connection Panel
Use the connection panel jacks to connect A/V components that will be connected continuously, such as Blu-Ray DVD Players
or a VCR.
The product color and shape may vary depending on the model.
N
1
POWER IN
Connects the supplied power cord.
2
SERVICE
Connect for service only.
3
PC IN
Connects to the video output jacks on your PC.
4
PC/DVI (HDMI2) AUDIO IN
Connect to the audio output jack on your PC.
This jack is also used as DVI audio output jack.
5
HDMI IN 1, 2, 3
Connect to the HDMI jack of a device with an HDMI output.
(HDMI 2 supports HDMI-DVI IN and connection from a PC.)
HDMI 2 can also be used as a DVI connection with
separate analog audio inputs. An optional HDMI/DVI
cable will be necessary to make this connection.
When using an optional HDMI/DVI adapter, the DVI
analog audio inputs on your TV allow you to receive left
and right audio from your DVI device.
6
ANT IN
Uses a 75Ω Coaxial connector for an Air/Cable Network.
-
-
7
AUDIO OUT (R/L)
Audio outputs to external devices.
8
3D SYNC OUT
Connect to 3D IR Emitter.
9
HEADPHONES JACK
You can connect a set of headphones if you wish to watch a
television programme without disturbing the other people in
the room.
Prolonged use of headphones at a high volume may
damage your hearing.
0
COMPONENT IN 1, 2 / AV IN 1
Connects Component video / audio. The COMPONENT IN 1
jack is also used as the AV IN 1 jack.
Connect the video cable to the COMPONENT IN 1
[Y/VIDEO] jack and the audio cable to the COMPONENT
IN 1 [R-AUDIO-L] jacks.
!
AV IN 2 (VIDEO / AUDIO R/L)
Video and audio inputs for external devices.
N
N
To Next Page
Loading...
