Changing the Sound Settings
Mode
You can select the sound mode to best suit the programming you’re watching.
Standard: This sound mode is for general purposes.
Music: Music mode enables you to listen to music as if you are sitting
in a concert hall.
Movie: Movie mode enables you to experience live and full movie sound as if you are
sitting in a movie theater.
Clear Voice: Emphasizes voice over other sounds. Select this sound mode when
watching news, soap operas, or documentaries.
Custom: You can customize the sound settings to suit your personal preferences.
Press the TOOLS button to display Tools menu.
You can also select the sound mode by selecting Tools → Sound Mode
T
You can select these options simply by pressing the S.MODE button on the remote
control.
Equalizer
The sound settings can be adjusted to suit your personal preferences.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz, 300Hz, 1KHz, 3KHz, 10KHz (Bandwidth Adjustment): Adjusts the level of
different bandwidth frequencies.
If you make any changes to the equalizer settings, the sound mode is automatically
switched to the Custom mode.
SRSTruSurroundHD→Off/On
SRS TruSurround HD is the combined technology of TruSurround and FOCUS, TruBass.
TruSurround is virtual sound effect under guarantee of Dolby that makes the virtual 5.1
channel via two speaker. FOCUS makes improve the degree of denition of sound and
TruBass reinforcements the low pitched sound.
SRS TruSurround HD enables you to enjoy a virtual 5.1 Surround Sound effect over the
TV's two speakers. This function provides not only rich deep bass also improves high frequency resolution.
Press the TOOLS button to display Tools menu.
You can also set the auto adjustment by selecting Tools → SRS TruSurround HD
T
You can select these options simply by pressing the SRS button on the remote control.
TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
MTS (Multi-Track Sound)
Mono: Choose for channels that are broadcasting in mono or if you are having difculty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
MTS is available only in TV mode.
Depending on the particular program being broadcast, you can listen to Mono, Stereo, or SAP.
Press the TOOLS button to display Tools menu.
You can also set the MTS mode by selecting Tools → MTS
T
Press the MTS button on the remote control repeatedly to select Mono, Stereo, or
SAP.
AutoVolume→Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the
volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering
the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Continued...
❑
•
•
•
•
•
O
❑
•
•
O
❑
O
❑
•
•
•
N
N
O
❑
Sound Control
To Next Page
Loading...
