Plug & Play Feature
N
N
1. Press the POWER button on the remote control. You can set the menu language. menu is automatically displayed. Select the
Press the ENTER
E
2. Store Demo or Home Use, then the ENTER
E
button.
N Home Use mode for the best picture in your home
environment.
Store Demo
N mode is only intended for use in retail environments.
If the unit is accidentally set to
N Store Demo mode and you want to return to Home Use
MENU
3. Press the ENTER
E
ENTER
E
your choice.
4. ENTER
E
button.
Air: Air antenna signal.
Cable: Cable antenna signal.
5. ENTER
E
button to select Start.
Digital & Analogue and Analogue channels.
Digital channels.
Analogue
For more de
N tailed description of selecting Cable mode,, refer to page 12.
The
N
channel search will start and end automatically.
Pr
N
ess the ENTER
E
button at any time to interrupt the memorization process.
A
N
fter all the available channels are stored, the message Set the Clock Mode. is displayed.
6. Press the ENTER
E
Auto, then Press the ENTER
E
button.
If
N
you select Manual, Set current date and time is displayed. (refer to page 27)
If
N
you have received a digital signal, the time will be set automatically. If not, see page 27
7. The brief instruction on How to get the best performance from your new HDTV. is displayed. Press the ENTER
E
button.
Th
N
is menu is available HD Connection Guide in the Support menu.
8. The message Enjoy your TVENTER
E
button.
If you want to reset this feature...
1. Press the MENUSetup,
then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3.
N
The N Plug & Play feature is only available in the TV mode.
Setup
Plug & Play
Time
Broadcast
Security
General
Plug & Play
You can set the menu language.
U
Move
E
Enter
Nederlands
English
Eesti
2009-06-30 10:02:54
To Next Page
Loading...
