English - 4
Using the Stand-Base
N
The PDP can rotate 20 degrees in right and left directions.
N
How to assemble the Stand-Base (depending on the model)
Using the 4 screws for securing the stand base and the monitor, firmly attach the
monitor to the stand base.
In case of installing your TV on the wall, close the
cover (1) on the stand-base connection part using
two screws for hiding.
Warning
Firmly secure the stand to the TV before moving
it, as the stand may fall and could cause serious
injury.
Two or more people should carry the TV.
N
possible damage to the screen.
Always store the TV upright.
-20° ~ 20°
Checking Parts
Remote Control/
AAA Batteries (2ea)
Power Cord Cloth-Clean
Safety Guide Manual
(Not available in all locations)
Screw (4ea) Cover-Bottom Holder-Ring (4ea)
Ferrite Core for Power
Cord (1ea)
N
core and clip it around the cable near the plug.
Connecting and Preparing Your TV
2009-06-30 10:02:49
To Next Page
Loading...
