English - 36
Troubleshooting
If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local
dealer.
No sound or picture
Speaker Select is set to External Speaker.
Normal picture but no sound
M
MUTE button has been pressed on the remote control.
No picture or black and white
picture
Adjust the colour settings.
Sound and picture
interference
Try to identify the electrical appliance that is affecting the television, then move it further away.
Blurred or snowy picture,
distorted sound
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
+ and – ends of the batteries are inserted correctly.
Screen is black and power
indicator light blinks steadily
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The damaged picture appears
in the corner of the screen.
If Screen Fit
The "Resets all settings to
the default values" message
appears.
This appears when you press and hold the EXIT button for a while. The product settings are
reset to the factory defaults.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
N
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product -
falling.
-
internal temperature of the product due to poor ventilation.
The appearance may differ depending on the product.
N
When installing the product with a stand When installing the product with a wall-mount
To Next Page
Loading...
