Configuring the Setup Menu
Menu Language
❑
You can set the menu language.
Broadcast
❑
Subtitle
You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode.
Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a
hearing-impaired person.
Subtitle Language
If the programme you are watching does not support the
N Hard of hearing function,
Normal automatically activates even though Hard of hearing mode is selected.
English is the default in cases where the selected language is unavailable in the
N
broadcast.
You can select these options simply by pressing the
O SUBT. button on the remote
control.
MHEG (Multimedia and Hypermedia Information Coding Experts Group)
N
An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the
MPEG system which includes
(Interactive TV), EC (Electronic Commerce), tele-education,
Teletext Language
English is the default in cases where the selected language is unavailable in the broadcast.
N
Preference
Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language /
Primary Teletext Language / Secondary Teletext Language
Using this feature, users can select one of the languages. The language selected here is the default when the user selects
Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If
you change this language setting, the new selection is only valid for the current channel. The changed setting does not change
menu.
Common Interface
Installing the CI Card
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2.
3. Insert the CAM with the CI CARD installed into the common interface slot.
Insert the CAM in the direction of the arrow, right up to the end so that it is parallel
N
with the slot.
4.
CI Menu
This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
Application Info.
This contains information on CAM inserted in the CI slot and displays it.
N
Function Description
Continued...
Setup
Plug & Play
Menu Language : English
Time
Broadcast
Security
General
2009-06-30 10:03:00
To Next Page
Loading...
