Setting up the TV with your PC
N SOURCE button to select PC mode.
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
N
Press the
T
TOOLS button to display Tools menu.
You can also set the adjustment by selecting .
Screen
❑
Coarse
Adjusts the frequency when vertical noise appears on the screen.
Fine
Adjusts the screen to be clearer.
PC Position
Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
Changing the Mode
❑
Provides the function to turn on the 3D Effect. You can choose between Mode1 and
Mode2
right and vice versa (left/right sync).
Off
Mode1
Mode2
2D
completely.
N
be syncing properly. To put them in sync, switch to the other mode.
Changing the Format
❑
Checker Board
Horizontal
Vertical
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Screen Burn Protection
▶
ReturnEnterMove
Format
▶
Return Enter Move
Screen
Fine 44
PC Position
Image Reset
Return Enter Move
Auto Adjustment
Screen
Advanced Settings
Picture Reset
PicturePicture
Advanced Settings
Picture Reset
Picture
2009-06-30 10:02:59
To Next Page
Loading...
