English - 30
Continued...
Setting Up Anynet+
Press the
T
TOOLS button to display Tools menu.
You can also display Anynet+ menu by selecting ToolsAnynet+(HDMI-CEC).
Setup
❑
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
N Anynet+ (HDMI-CEC) function is disabled, all the Anynet
+
related
operations are deactivated.
Yes / No
The active source on the TV remote must be set to TV to use the Anynet N
+
function.
If you set
N Auto Turn Off to Yes
Scanning and Switching between Anynet
+
Devices
1. Press the TOOLS button. Press the ENTER
E
button to select
Anynet+ (HDMI-CEC).
2. Device List, then press the ENTER
E
button.
N
press the red button to scan for devices.
N Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List
menu appears.
3. ENTER
E
button.
It is switched to the selected device.
N
The time required to scan for devices is determined by the number of connected devices. N
N
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV N
when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the
connected device.
N SOURCE
switch to an Anynet+ device by using the Device List.
Application
Anynet+ (HDMI-CEC)
Device List
Setup
U
Move
E
Enter
R
Return
U
Move
E
Enter
R
Return
Setup
View TV
Device List
DVDR MENU
Setup
U
Move
L
Adjust
R
Return
2009-06-30 10:03:02
To Next Page
Loading...
