English - 28
Source List / Edit Name
Source List
❑
your choice.
TV, Ext., AV, PC, Component, HDMI1, HDMI2/DVI, HDMI3.
N
Source List, connected inputs will be highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
Using the Colour buttons on the remote with the Source list
N
Red -
T - TOOLSEdit Name and Information menus.
Press the
O SOURCE
TV mode can be selected by pressing the TV button, number buttons (0~9), and the
P < / > button on the remote control.
Edit Name
❑
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray /
HD DVD / DMA
N
HDMI IN 2 (DVI) port, you should set the HDMI2 / DVI mode to PC in the Edit Name of
the Input mode.
Supported Program
Self Diagnosis
❑
Picture Test, Sound Test, Signal Information
N Speaker Select is set to TV speaker
in the Sound menu.
The melody will be heard during the test even if
N Speaker Select is set to External Speaker or the sound is muted by pressing
the MMUTE button.
N
Software Upgrade
❑
the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the
option to install the upgrade.
By USB
the power or remove the USB drive while upgrades are being applied. The TV will turn off and
settings so that you can easily reset them after the upgrade.
By Channel
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade
mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.
Alternative Software
Replace the current software with the alternative.
HD Connection Guide
❑
The brief instruction on How to get the best performance from your new HDTV
HD devices.
Contact Samsung
❑
N
Source List
Edit Name
Input
TV Rear Panel
USB Drive
2009-06-30 10:03:01
To Next Page
Loading...
