English - 18
Picture Options
❑
In N PCColour Tone, Size and Screen
Burn Protection from among the items in Picture Options.
Colour Tone Cool / Normal / Warm1 / Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
N Picture mode.
Warm1
N or Warm2 is only activated when the picture mode is Movie.
Size
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide
16:9
Wide Zoom
vertically.
Zoom
4:3
Screen Fit
The picture size options may vary depending on the input source.
The items available may differ depending on the selected mode.
N
In N PC Mode, only 16:9 and 4:3 mode can be adjusted.
N
Temporary image retention may occur when viewing a static image on the set for more than two hours. N
Wide Zoom N Position, then press the ENTER
E
button.
ENTER
E
button.
Zoom
N Position, then press the ENTER
E
up and down. Then press the ENTER
E
Size, then press the ENTER
E
button. Press the
ENTER
E
button.
After selecting
N Screen Fit in HDMI (1080i / 1080p) or Component Position by pressing
Reset
N Reset, then press the ENTER
E
button. You can initialize the setting.
If you use the
N Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
function.
You can select these options simply by pressing the
O
P.SIZE button on the remote
control.
Screen Mode
Auto Wide
intended for users to select it.
16:9
Wide Zoom
vertically.
Zoom
4:3
This function is available in
N
Auto Wide mode.
This function is not available in
N
PC, Component or HDMI mode.
Digital NR Off / Low / Medium / High / Auto
and ghosting that may appear on the screen.
N
HDMI Black Level Normal / Low
N
Continued...
Advanced Settings
Picture Options
Picture Reset
Picture
2009-06-30 10:02:57
To Next Page
Loading...
