Samsung QB49N

92
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Network Standby
Power Button
Off
On
On
Off
Power on only
"
The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to
the display.
The message No Signal will appear if no source device is connected.
• Off
The message No Signal will appear if no input signals are detected.
"
If the message, "No Signal" appears even though a source device is connected, check the cable connection.
"
If No Signal Message is set to Off, the No Signal message does not appear.
In this case, set No Signal Message to On.
• On
Power-saving mode will activate if no input signals are detected.
Network Standby
This feature keeps the network power on when the product turns off.
• Off / On
Power Button
The power button on the remote control can be set to turn on the power or turn on or off the power.
• Power on only: Set the power button on the remote control
only to turn on the power.
• Power on and off: Set the power button on the remote control
to turn on or off the power.