29
Install your wall mount on a solid wall perpendicular to the floor. Before
contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in
provided.
Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
used or the consumer fails to follow the product installation instructions.
Do not mount the product at more than a 15 degree tilt.
Always have two people mount the product on a wall.
Model name VESA screw hole specs (A * B)
in millimeters (inches)
Standard Screw Quantity
DBJ
M8 4
QBH / QHH / QMH
shock.
If you want to use a wall mount, make sure that it allows you to remove the product from it without using any
additional tool. (Supported models: DBJ)
Wall Mount Kit Specications (VESA)
To Next Page
Loading...
