Samsung RS261M - Inspect WATER DISPENSER DRIPPING

- 23/47 -
Step 1
① Disassemble COVER-LEG FRONT
※ WATER DRIPPING occurs
as WATER LINE AIR
Step 2
① Inspect WATER HOSE SCRATCH
 Re-connect after cutting
SCRATCH part
Step 3
① Inspect WATER TANK AIR
② Pressing WATER LEVER and shake CASE
FILTER as left-right to dispense inner Air to
outside.
Step 4
① Disassemble UNIT WATER VALVE HOSE and
inspect water leak on Closing condition.
Step 5
① Disassemble Water hose which is connected
to product.
② Inspect bubble occurrence in the water when
supply water to container.
- When BUBBLE appears it is not the
problem of the product.
Step 6
① Ice which is made during ICE dispensing
meld and flow to CASE DISPENSER is normal
phenomenon.
- Customer explanation
Check Point
Inspect WATER HOSE LINE LEAK
Tip 4-2. Inspect WATER DISPENSER DRIPPING
HOSE SCRATCH
BUBBLE